products

MP4.0 - 4 Stack 5 Station Gyms
     Leg Extension/Leg Curl
     Upper Body
     Low PulleyAdjustable Cable Column
     Leg Press

The height of all MP machines is 83-3/4"

• Color-coded, large scale label includes easy-to-follow user instructions, beginning and ending exercise positions, anatomical charts for muscles reference,
and recommended maintenance schedule. Rear printed on non-fade washable Lexan material.

Structural Frame
• Modern styling and structural reliability through the use of 40mm x 80mm and 50mm x 100mm oval shaped tube and precision laser cut steel plate components.

Exercise Position Labels
• Color-coded labels indicate proper adjustment-positions for quick and easy user reference.

Adjustments
• Color-coded adjustment knobs provide quick and easy user reference, enhance aesthetics and eliminate corrosion. Positive locking adjustments use permanently
enclosed compression spring for maximum security.

Custom Handgrips
• Extruded thermo rubber compound handgrips provide durability and comfort.

Custom Molded Feet
• Located under the base frame to insure stability and prevent marring of floor surfaces.

Cables
• US made mil-spec lubricated 1/8" cable nylon coated to 3/16", with a 2,000 lbs. tensile strength and swaged ball fitting and 5/8" threaded
bolt tension adjustment for maximum durability.

Selector Shaft Assembly
• Cold rolled solid 1" selector shaft, chrome-plated for durability and appearance. Machined bullet tip insures proper weight stack entry.
Custom designed cap plate with fitted bushings insures low-friction movement of weight plates over guide rods. Receptacle integrated into cap plate provides
selector pin storage when user desires zero weight plates.

Pulleys
• Fiberglass™ reinforced pulleys with deep V-grooved channel provide secure cable seating and optimum bearing rotation. Sealed ball bearings
insure smooth and quiet pulley operation.

Weight Stack
• Choice of 10-lb. or optional 15-lb. increment machined weight plates, 1" thick with fitted nylon bushings to assure smooth travel on guide rods.

Heavy-Duty Selector Pin
• Magnetic selector pin assures positive locking to plates and is secured to the weight stack with a thick plastic-coated elastic cable.

Axles and Ball Bearings
• 1" Solid steel pivot axles with lubricated 25mm sealed bearings encased in steel housings for frictionless movement and precision alignment of pivots.

Weight Stack Enclosure
• Heavy-duty 16-gauge steel panels enclose weight stacks for safety and aesthetics. Each panel can be easily removed when necessary.

Paint Colors
• Electrostatically applied powder coat finish enhances appearance and durability. Frame color is Silver Sparkle. Shroud is painted Storm Grey.Weight plates are black.

Upholstered Pads
• Superior-grade Grey upholstery stitched over high density foam with 3/4" CDX plywood. Design Standards

Design Standards
• All MP models meet or exceed ASTM and EN-957
Safety Design Standards. This includes the following:
 component spacing between moving parts
 guarding of weight stacks, pulleys and cams
 edge and corner sharpness of components
 stability to floor surface during operation
 structural testing to insure product durability
 warning labels and instructional signage
 documentation of design specifications